IKM Technology Subsea Compensator general purpose is for temporary underwater hydraulic systems. It provides a given volume and pressure for oil-filled subsea equipment. Recommended direction for installation is vertical. Designed, tested and used for compensation of oil-filled cavities on temporary subsea equipment as ROV’s and ROT’s.
Various types and models.
Empty compensator sensor (electrical) is optional for some compensators.
Connector Pin Configuration:
1 – 0VDC
2 – Signal 0-10V
3 – 10VDC
Type | Subsea compensator |
Model | 6 liter /w sensor |
Part Number | 6315-005 |
Material | POM, stainless steel, aluminium and rubber |
Fluid | Mineral Oil |
Weight Air | 16,8 kg |
Weight Water | 10,0 kg |
Length compressed | 468 mm |
Length expanded | 696 mm |
Ø Flange | 250 mm |
Ø Body | 220 mm |
Pressure empty (10%) | 0,15 bar |
Pressure full (90%) | 0,40 bar |
Data sheet
DTB-6315-005-Subsea_Compensator_6_liter_sensor.pdf |
Download |