IKM Technology Subsea Compensator general purpose is for temporary underwater hydraulic systems. It provides a given volume and pressure for oil-filled subsea equipment. Recommended direction for installation is vertical. Designed, tested and used for compensation of oil-filled cavities on temporary subsea equipment as ROV’s and ROT’s.
Various types and models.
Empty compensator sensor (electrical) is optional for some compensators.
|Material||POM, Stainless steel, aluminium and rubber|
|Weight Air||9,44 kg|
|Weight Water||4,74 kg|
|Length compressed||246 mm|
|Length expanded||462 mm|
|Ø Flange||246 mm|
|Ø Body||200 mm|
|Pressure empty (10%)||0,2 bar|
|Pressure full (90%)||0,4 bar|